Bone Plate Manufacturer



We are the best manufacturer & exporter of wide range of Bone plates like cloverleaf plates, cobra plates, condylar blade plates, condylar buttress plate, dcs barrel plates, dynamic self compression plates, and interferometric bone plates. Currently osteotemy equipment is made primarily of titanium and stainless steel. The broken bones are first surgically reset into their proper position. Then a plate is screwed onto the broken bones to hold them in place, while the bone heals back together.

Compression Plates – 3.5 mm Small Compression Plates
Description:-
  •  Range : 4 holes to 15 holes
  •  Thickness : 3.0 mm
  •  Width : 10.0 mm
  • Hole Spacing : 12.0 and 13.0 mm
http://bone-plates.com/wp-content/uploads/2011/09/compression-plates-3-5-mm-small-compression-plates.jpg
Compression Plates – 4.5 mm Narrow Compression Plates
Description:
  • Range : 4 holes to 16 holes
  • Thickness : 3.6 mm
  • Width : 12.0 mm
  • Hole Spacing : 16.0 and 25.0 mm
http://bone-plates.com/wp-content/uploads/2011/09/compression-plates-4-5-mm-narrow-compression-plates.jpg
Compression Plates – 4.5 mm Broad Compression Plates
Description:

  •  Range : 5 holes to 16 holes
  •  Thickness : 4.5 mm
  •  Width : 16.0 mm
  •  Hole Spacing : 16.0 and 25.0 mm



Limited Contact Compression Plates 3.5 mm Small Plates
   Description:-
  •  Range : 4 holes to 15 holes
  •  Thickness : 4.0 mm
  •  Width : 11.0 mm
  •  Hole Spacing : 13.0 mm
http://bone-plates.com/wp-content/uploads/2011/09/limited-contact-compression-plates-3-5-mm-small-plates.jpg

   Different Conventional Plates Reconstruction Plates 3.5 & 4.5 mm Straight
   Description:-
  •      Range : 5 holes to 20 holes
  •     Thickness : 2.8 mm
  •     Width : 10.0 mm
  •     Hole Spacing : 12.0 mm

Comments

Post a Comment

Popular posts from this blog

Introduction of Bone Plate

Image
  Bone plates are used in the internal fixation of fractures. The plate is mounted to the bone by application of screws on either side of the fracture. When designing  Bone plates  design, material selection, and biologically compatible are the three important Works out. The bone plate must be sufficiently able to help the heap regularly positioned on the bone while the bone mends. The plate must also have flexibility similar to that of the bone to which it is attached. The implant must be incautious and cannot cause a kindling response in the body. The solidity of the bone plate is important because the stress shielding will increase with the difference solidity. Stress protecting is the wonder where the embed bears the majority of the heap regularly positioned on the bone. Although this is favorable while the bone is weak, as the bone heals and regains strength, if the bone plate does not allow the bone to carry an increasing load, there will be a reduction of bone mass...
Read more

Cervical Spine Plate

Image
  Introduction: HCM Ortho-Care specializes in medical devices and orthopedic implants, including  cervical spine plates . A cervical spine plate is a medical device used in orthopedic and neurosurgical procedures to stabilize the cervical spine (the neck region of the spine) following surgery. In spinal surgery, a specialized medical device called a cervical plate is used by surgeons to stabilize the cervical spine, which includes the neck area. It guarantees compatibility with the human body and is usually made of biocompatible materials like titanium or stainless steel. Here are some features and uses of their cervical spine plates: Anatomical Design : HCM Ortho-Care's cervical spine plates are designed to match the anatomy of the cervical spine, providing a precise fit and optimal support for the vertebrae. Material Quality : These plates are typically made from high-quality medical-grade materials such as titanium or stainless steel, ensuring biocompatibility and strength....
Read more

Pedicle Screw System

Image
Introduction: We are the leading provider of pedicle screw systems, both as manufacturers and suppliers, and we offer the entire pedicle screw line. We offer the entire selection of pedicle screws in one location, all at a reasonable cost. A  pedicle screw system  is a crucial component used in spinal surgeries for the treatment of spinal instability, deformities, injuries, or other spinal disorders. It's an orthopedic implant designed to provide stability and support to the spine by connecting rods, plates, or other stabilization devices to the vertebrae. The primary purpose of the pedicle screw system is to support the spinal cord. The pedicle screws are positioned on the vertebrate to be fastened, and the rods that stop the screw system from moving help to secure the screws. When it comes to bone grafting, these rods are offering incredibly stable packing. Here are the key components and functions of a pedicle screw system: Screws:  Pedicle screws are usually made of s...
Read more